UMM-USA My Account  Cart Contents  Checkout  
  Top » Catalog » 4. Tools / Supplies » Finishing » Decaling » MI-2 Home  |  Order Form  |  Ordering & Shipping Info  |  My Account  |  Cart Contents  |  Checkout   
Categories
1. Accessories->
2. Model Kits->
3. Decals / Masks->
4. Tools / Supplies->
  Cutting
  Non-Cutting
  Sanding
  Scribing
  Riveting
  Chiseling
  Punches & Dies
  Bending & Rolling
  Holding
  Drilling
  Finishing->
    Paint Accessories
    Hobby Paints
    Brushes
    Airbrushes & Compressors
    Paint Booths
    Decaling
    Fillers
    Masking
    Weathering
  Jigs & Stands
  Adhesives
  Supplies
  Miscellaneous
5. Magazines / Books->
6. Miscellaneous->
7. Second Chance->
Manufacturers
What's New?
UMM29B GOLDEN Old Fashioned glue applicator (Large Tip) - B
UMM29B GOLDEN Old Fashioned glue applicator (Large Tip) - B
$4.96
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
MI02 MICRO SOL Decal Setting Solution - 1oz
[MI-2]
$4.50

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models.
It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion.
The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface.
For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work.
Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged.
For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive.
Make sure the surface is free of particles that could get under the decal's film and cause a blemish.
Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush.
Apply with as few strokes as possible so a not to disturb the decal.
Then allow the decal to dry without disturbing it.
One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Microscale Instruction Sheet: http://www.microscale.com/Merchant2/graphics/Instructions/MSISysteminstr.pdf

This product was added to our catalog on Saturday 08 December, 2018.
Reviews
Customers who bought this product also purchased
M14A Fine Point - Slide Lock Tweezer 5"
M14A Fine Point - Slide Lock Tweezer 5"
UMM03 UMMô Third Generation Scriber SCR-03 "Universal"
UMM03 UMMô Third Generation Scriber SCR-03 "Universal"
MN040S UMMô Flexible Scribing Ruler SET 0.05/10/15 (VS.S) 6 1/2"
MN040S UMMô Flexible Scribing Ruler SET 0.05/10/15 (VS.S) 6 1/2"
M14B Fine Flat - Slide Lock Tweezer 5"
M14B Fine Flat - Slide Lock Tweezer 5"
AC-FA201 P-47D Thunderbolt Eileen (B.15) 1/72
AC-FA201 P-47D Thunderbolt Eileen (B.15) 1/72
SRI600 Plastic Tweezers (Y) 5"
SRI600 Plastic Tweezers (Y) 5"
UMM30  UMMô ULTRA MICRO CHISEL - 0.7mm DOUBLE BEVELED
UMM30 UMMô ULTRA MICRO CHISEL - 0.7mm DOUBLE BEVELED
UMM36 UMMô ULTRA MICRO CHISEL - 1.5mm ELLIPTICAL
UMM36 UMMô ULTRA MICRO CHISEL - 1.5mm ELLIPTICAL
JLC005 - JLC Micro Spare Saw Blades (3pcs)
JLC005 - JLC Micro Spare Saw Blades (3pcs)
UBZI100 THE RIVETER - Single rivet wheel 1.00mm (1/32)
UBZI100 THE RIVETER - Single rivet wheel 1.00mm (1/32)
MN038 UMMô 3D Ultra Thin LP scriber
MN038 UMMô 3D Ultra Thin LP scriber
UBZI050 THE RIVETER - Single rivet wheel 0.50mm (1/72 & 1/48)
UBZI050 THE RIVETER - Single rivet wheel 0.50mm (1/72 & 1/48)
Shopping Cart
0 items
Manufacturer Info
MICROSCALE ACCESSORIES
Other products
Notifications
NotificationsNotify me of updates to MI02 MICRO SOL Decal Setting Solution - 1oz
Reviews
Write ReviewWrite a review on this product!
Languages
English
Currencies

Copyright © 2023 UMM-USA